How to repair the broken led cob down light?

1. The installation of ceiling LED COB down lights is an essential part of the entire home lighting. Generally, we will estimate the number of downlights installed when installing the ceiling, as well as the direct installation distance between the downlights and downlights, and then It is to open holes for installation, but the Cob Led Downlight is installed and it is not indestructible. Once the LED downlight is broken, how to replace it? How to disassemble and repair the LED spotlight in the living room? Common tools for replacing and repairing LED downlights generally include: electric tape, a set of LED down lights of the same model, pliers, and a small hand saw if necessary.

2. Turn off the power and slowly buckle down the lamp. Pay attention to the reed clip on the lamp. After seeing it, press it down with your finger to take out the lamp. If you don`t pay attention to the reed clip, you will be injured by the reed clip when you pull down the lamp head , so be careful when removing old bad led downlights.

High Grade And Cheap Led Small Panel Lamp High Grade And Affordable Led Small Panel Lamp High Quality And Affordable Integrated Led Panel Luminaire

3. Then first disassemble the connector and replace the lamp head. If the driver does not move, turn on the light switch. If the light is not on, it can be determined that the driver is faulty and replace the driver.
4. At this time, turn off the light switch (for safety), it is best to turn off the main power supply, and then unplug the power supply line of the drive (it can also be cut short directly), then remove the bad drive and connect the power supply of the new drive The input section is peeled off, and the two lamp wire ends are peeled off.
5. Let one of the driver power cords be wrapped around one of the light power cords (lighting power is not divided into positive and negative), and then glued with electrical tape, and the other one is connected in the same way and wrapped with electrical tape.

6. It is about to be completed. Next, the power-on experiment will turn on the switch and the light will be on. If it is not on, repeat the above steps, but instead of replacing the driver, you can directly replace the Led Cob Down Light House.

The above content is provided by WOSEN. WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349